Go to content
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Main Form Products > Tapes > Tapes: Silicone - Aviation / Military
Dropdown with Redirect

Silicone Rubber Electrical Tapes MIL-I-46852 / A-A-59163 / MIL-I-22444

All tapes meet 14 CFR 25.853(a) at amendment 25-116; Appendix F, Part I(a)(1)(i)  (60 Second Vertical Flammability Test).

Amphenol Circular and other Style Connector Back-shell Clamp Isolation Tape/Bushing


500°F / 260°C Continuous Exposure: Higher Intermittent

The Amphenol line of silicone tapes covers 5 tape options with a total of 75 variants.  The options are Width, Thickness, Type, Color and Roll Length. The most commonly ordered and popular versions ares 1" wide, 0.020" thick, in Type I or Type II and in Oxide-red or Black color. If you need assistance in choosing a variant please read our FAQ or contact our Technical Support.

FlameShieldä Amphenol connector back-shell clamp isolation tape is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications.  The tape is used to form bushings to aid in strain relief.  Popular for use in avionics and marine wiring.

The tape has no adhesive, but sticks to itself (self-fuses or self-amalgamating) when stretched and wrapped onto itself.  The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade.  This tape makes a waterproof, weatherproof and air tight protection. Oxide-red and black colors are standard - other colors are available.

Available in widths from 1/2" / 12.9mm up to 3" / 76mm.  Available in standard non-reinforced version (unsupported) or with sinusoidal weave glass reinforcement (supported).

FlameShieldä Amphenol tapes provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value.

This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.  Makes an in-situ bushing for protecting wiring at the back-shell clamp.

Amphenol Backshell Clamp Isolation Tape
Back-shell clamp tape bushing
Amphenol Backshell Clamp Tape
Amphenol Bushing Electrical Tape

How our on-line cart system works If an item has a price of $0.00 after you choose its options then call our order desk to complete a purchase

Amphenol Connector Backshell Clamp Silicone Rubber Electrical Tape
Amphenol Connector
Silicone Rubber Tapes
CofC Test Report
Documents:
CofC / Test Reports
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 679-8592
Office hours: 8:00AM to 4:30PM Eastern Time
All content copyright AB Technology Group
Back to content