Order Desk (610) 906-3549
ABTHERMAL™ High Temperature, Heat, Fire, Flame, Weld Splatter, Molten Splash and Abrasion Protection for Wires, Cables, Hoses, Pipes, Lines, Equipment & Personnel
Follow us on Twitter for new product announcements
Need Technical Help? Email us at: [email protected]
FAX: (610) 340-9054
Email orders: [email protected]
EU/UK Call +44 (0) 1202 233 268 Fax: +44 (0) 1202 830 425
Order Desk Tel: (610) 906-3549 . . . 8am-5:30pm Eastern M-F
Go to content
Products > Tapes > Tapes: Silicone - Aviation / Military

Amphenol ITT Cannon Connector Backshell Clamp Isolation Tape/Bushing


500°F / 260°C Continuous Exposure: Higher Intermittent

FlameShieldä Amphenol ITT Cannon connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting A-A-59163 and Mil-I-46852 specifications.  The tape is used to form bushings to aid in strain relief.  Popular for use in avionics and marine wiring.

The tape has no adhesive, but sticks to itself (self-fuses or self-amalgamating) when stretched and wrapped onto itself.  The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade.  This tape makes a waterproof, weatherproof and air tight protection.

This tape is available in almost any color, but oxide-red and black are the most common.

Amphenol FlameShieldä tapes meeting A-A-59163 and Mil-I-46852 provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value.

This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts.  Makes an in-situ bushing for protecting wiring at the backshell clamp.

amphenol backshell clamp bushing tape
amphenol backshell clamp bushing tape
amphenol backshell clamp bushing tape
AB Technology Group
431 State Street, Box 1491, Ogdensburg, NY 13669
116 Albert Street - Suite 300, Ottawa, ON K1P 5G3
Tel: (610) 906-3549
Fax: (610) 340-9054
Web by Archer-Technology.com
Back to content