Main Form Products > Tapes > Tapes: Silicone - Aviation / Military
Silicone Rubber Electrical Tapes MIL-I-46852 / A-A-59163 / MIL-I-22444
All tapes meet 14 CFR 25.853(a) at amendment 25-116; Appendix F, Part I(a)(1)(i) (60 Second Vertical Flammability Test).
Cinch Circular Connector Back-shell Clamp Isolation Tape/Bushing
500°F / 260°C Continuous Exposure: Higher Intermittent
The Cinch line of silicone tapes covers 5 tape options with a total of 75 variants. The options are Width, Thickness, Type, Color and Roll Length. The most commonly ordered and popular versions ares 1" wide, 0.020" thick, in Type I or Type II and in Oxide-red or Black color. If you need assistance in choosing a variant please read our FAQ or contact our Technical Support.
FlameShieldä Cinch MIL-DTL-26482 circular and other style connector backshell clamp isolation tape is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics and marine wiring.
Both unsupported (no glass layer) and supported (with glass layer) sinusoidal weave glass reinforced versions of the tape are available in oxide-red and black colors. Other colors are available.
The tape has no adhesive, but sticks to itself (self-fuses or self-amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
Cinch MIL-DTL-26482 Series FlameShieldä tapes provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value.
This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts. Makes an in-situ bushing for protecting wiring at the back-shell clamp.
Cinch Connector Backshell
Silicone Rubber Tape
Documents:
CofC / Test Reports