Main Form Products > Insulations / Felts
Silicone Closed Cell Insulating Sponge Foam with Aluminized Fabric Facing - High temperature and heat resistant - low thermal conductivity
392°F / 200°C Continuous Exposure: Higher Intermittent
DeltaMaxä silicone sponge foam with Aluminized fabric facing on one side - low thermal conductivity insulation.
Thermal management for engine compartments, Electronic enclosures, HVAC systems.
Thermal
conductivity of 0.067 W/m °K.
Areal density: 2.5mm thickness – 0.83 kg/m2 / 0.17
lb/ft2
5.0mm
thickness – 1.17 kg/m2 / 0.24 lb/ft2
The foam component of this lamination meets
EN45545 / 49CFR238 / NFPA 130 / BS6853 (legacy) for HL3 requirements in R2 / R3
/ R22 / R23 applications (passenger railcars).
The foam component also meets various standards
for Surface Flammability (ASTM E162 / ASTM D3675), Smoke Density (ASTM E662), Toxic
Gas Generation (SMP 800-C), Flame Spread (ASTM C1166) and Heat Release (ASTM
E1354).
The 2.5mm thickness lamination meets ASTM
E162, ASTM E662 and SMP 800C.
