Main Form Products > Sleeve Groups > > Sleeves - Firesleeve Group > Aviation Firesleeve Equivalents
Thermotubix-Aero Equivalent Firesleeve - SAE AS1072E Aerospace/Aviation Grade for Wire, Cable and Hose Protection from high temperature, heat, flame & fire
500°F / 260°C Continuous Exposure; 2200°F / 1205°C Excursions; 3000°F / 1650°C Peak Short Term Exposure
Thermotubix-Aero aviation / aerospace grade high temperature, heat, flame and pyro resistant firesleeve jacket is manufactured to SAE AS1072E standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75. Meets 14 CFR 25.869(a)(4); Appendix F, Part 1(b)(7) (60-degree flammability Test).
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
Standard colors are oxide-red and black - other popular colors are silver-grey, blue, yellow and green. Available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 25 size steps.
Part Numbers (with SAE marking):
Thermotubix-Aero-8, Thermotubix-Aero-9.5, Thermotubix-Aero-12.7, Thermotubix-Aero-16, Thermotubix-Aero-19, Thermotubix-Aero-22, Thermotubix-Aero-25, Thermotubix-Aero-32, Thermotubix-Aero-38, Thermotubix-Aero-45, Thermotubix-Aero-51, Thermotubix-Aero-57, Thermotubix-Aero-64, Thermotubix-Aero-76, Thermotubix-Aero-89, Thermotubix-Aero-101
SAE AS1072 Aviation Firesleeve Hose Protection