Main Form Products > Sleeve Groups > > Sleeves - Firesleeve Group
"Firesleeve" Sub-category
SAE AS1072 Aviation
Firesleeve
Documents:
CofC / Test Reports
Firesleeve - SAE AS1072E Aerospace/Aviation Grade for Wire, Cable and Hose Protection
High temperature, heat, flame & fire protection for wire, cable and hose protection
Allows qualified hose assemblies to pass AS1055D.
Available with, or without marking.
Meets 14 CFR 25.869(a)(4); Appendix F, Part 1(b)(7) (60-degree flammability Test).
500°F / 260°C Continuous Exposure; 800°F / 426°C Short Term Exposure
2200°F / 1205°C Excursions; 3000°F / 1650°C Peak Exposure
FlameShield™ aviation / aerospace grade high temperature, heat, flame and pyro resistant firesleeve jacket is manufactured to SAE AS1072E standards so it can pass the fire testing standards of AS1055D; and the requirements of FAA TSO - C53a and TSO - C75. Also meets 14 CFR 25.869(a)(4); Appendix F, Part 1(b)(7) (60-degree flammability Test) for use as a wiring/cable protection sleeve.
It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines. "Fire-proof" hose lines, as defined by the FAA, must withstand a direct flame for fifteen minutes under specified flow conditions without failure. Fire-resistant lines must withstand a 5 minute exposure under these conditions.
Fire-proof hose lines are obtained when the proper size Firesleeve is selected and properly assembled with appropriate clamps.
Standard colors are oxide-red and black - other popular colors are silver-grey, blue, yellow and green. Available in sizes ranging from 0.25" Inside Diameter through 5" I.D. in 25 size steps.
