Main Form Products > Tapes > Tapes: Silicone - Aviation / Military
ITT Cannon Connector Backshell Clamp Isolation Tape/Bushing
500°F / 260°C Continuous Exposure: Higher Intermittent
FlameShieldä ITT Cannon connector backshell clamp isolation tape (Garmin 249-00114 equivalent) is a silicone rubber self-fusing self-amalgamating tape meeting MIL and commercial specifications. The tape is used to form bushings to aid in strain relief. Popular for use in avionics and marine wiring.
The tape has no adhesive, but sticks to itself (self-fuses or self-amalgamating) when stretched and wrapped onto itself. The tapes starts curing within minutes, and after several hours cannot be unwound or removed without using a sharp knife or blade. This tape makes a waterproof, weatherproof and air tight protection.
This tape is available in almost any color, but oxide-red and black are the most common.
ITT Cannon FlameShieldä tapes meeting provide superior electrical insulation with a minimum of 300 volts per mil (.001") of tape thickness at 365°F / 180°C. A 20mil tape therefore provides 6000 volts per wrap of insulation value.
This tape is also used to wrap hydraulic connections and to make vibration resistant bumpers and spacers for wiring, cable, hose, pipes and lines. This tape is used to wrap and hold insulation in place on hot air ducts. Makes an in-situ bushing for protecting wiring at the backshell clamp.
 |
 |
 |
To buy this product now on-line, use the shopping cart product selector below.
Any Problems?... Call 610-906-3549 during business hours for immediate help - Then press 1 for the Order Desk or 2 for Technical Support.
Silicone Rubber Self Fusing Tape
Self-bonding self-fusing silicone rubber tape. Meets A-A-59163 and MIL-I-46852specifications.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
Most tapes are available in Type I (Rectangular) and Type II (Triangular) profile. Most tapes are available in Black or Oxide-red color.
Add Certificate of Conformance if required at the bottom of the pick list.
$ 0.00
Add
Silicone Rubber Self Fusing Tape
Add Certificate of Conformance and Test Reports if required to your order
$ 0.00
Add
If you require a CofC or Test Reports, please ensure you select them as well in the cart above and add them to your order.