Main Form Products > Sleeve Groups > 1200°F / 648°C - FIBERGLASS SMALL AWG SIZED GROUP
Braided Fiberglass Sleeve with VITON® fluoroelastomer coating for small diameter wire and cable protection
High Temperature, Heat, Flame, Ozone and Radiation Resistant and Thermal Insulating
428°F / 220°C Continuous Exposure: Higher Intermittent
FlameShieldä Viton® 231 fluoroelastomer coated fiberglass sleeve is designed as a primary insulation sleeve for protecting small diameter wire, cable, lines, hose, and pipe from high temperature, flame and environmental contamination. Recognized by UL / CSA for 220°C, 7000V service, and complies with VW-1 flammability requirements. Conforms to, and is listed on the QPL for MIL-I-3190/9. Available in 3 grades: NEMA Grade A-1, B-1 and C-1. High ozone levels and radiation resistant.
Extremely flexible and easily installed. Used in electrical apparatus as a primary or secondary wiring insulation. Suitable for use in silicone free requirement environments. Resistance to solvents, both aromatic and aliphatic; fuels, including JP-5; and oils, including Skydrol.
The inner braid is very fine and dense, and along with the precision Viton® 231 coating, this is the toughest cut and abrasion resistant flexible sleeve we have available for wire, cable and hose protection.
Also provides protection from ozone, UV and abrasion. This product is UL/CSA approved and used on a wide variety of equipment such as fixtures, appliances and motors for wiring protection.
This sleeve is available only in white, black and natural (dark tan). This sleeve is only available in full spool lengths shown in the catalog.
Properties:
Tensile Strength, coating (ASTM-D412): 200 psi @ 24C, 600 psi @ 149C
To buy this product now on-line, use the shopping cart product selector below.
Any Problems?... Call 610-906-3549 for immediate help - Then press 1 for the Order Desk or 2 for Technical Support.
AWG Wire Sized Small Diameter Sleeve
Small Diameter Braided Fiberglass with Viton coating sleeve for AWG wire sized protection. High performance fluoroelastomer sleeve for solvent, fuel and oil resistance. Available in 3 dielectric grades (A-1, B-1 and C-1). Full spools only.
$ 0.00
Add